#! /bin/sh


_Usb_HD_Mount(){

#usb_num=1
#HD_N=`mount |grep "/dev/sd" | awk '{print $1}'| awk 'BEGIN{FS="/"}{print $3}'`

#for f in $HD_N; do 
 
 
if [ -f "/userfs/bin/tcapi" ];then
			#usb_path_num=`tcapi show USB_Entry | grep "=$f" | awk 'BEGIN{FS="_"}{print path$2}'`
			ACT=usb_path$1_act
			SERIAL=usb_path$1_serial
			PID=usb_path$1_pid
			VID=usb_path$1_vid
			USB_ACT=`/userfs/bin/tcapi get USB_Entry $ACT`
			USB_SERIAL=`/userfs/bin/tcapi get USB_Entry $SERIAL`
			USB_PID=`/userfs/bin/tcapi get USB_Entry $PID`
			USB_VID=`/userfs/bin/tcapi get USB_Entry $VID`

if [ "$2" == "1" ]; then
			echo "usb$2_act=$USB_ACT" >/tmp/usbinfo
else
			echo "usb$2_act=$USB_ACT" >>/tmp/usbinfo
fi
			echo "usb$2_serial=$USB_SERIAL" >>/tmp/usbinfo
			echo "usb$2_pid=$USB_PID" >>/tmp/usbinfo
			echo "usb$2_vid=$USB_VID" >>/tmp/usbinfo
			
else
			usb_path_num=`nvram show | grep "usb_path"| grep "=$f" | awk 'BEGIN{FS="_"}{print path$2}'`
			ACT=usb_path$1_act
			SERIAL=usb_path$1_serial
			PID=usb_path$1_pid
			VID=usb_path$1_vid
			USB_ACT=`nvram get $ACT`
			USB_SERIAL=`nvram get $SERIAL`
			USB_PID=`nvram get $PID`
			USB_VID=`nvram get $VID`
if [ "$2" == "1" ]; then
			echo "usb$2_act=$USB_ACT" >/tmp/usbinfo
else
			echo "usb$2_act=$USB_ACT" >>/tmp/usbinfo
fi
			echo "usb$2_serial=$USB_SERIAL" >>/tmp/usbinfo
			echo "usb$2_pid=$USB_PID" >>/tmp/usbinfo
			echo "usb$2_vid=$USB_VID" >>/tmp/usbinfo
			
	
fi
#usb_num=$(($usb_num+1))
#done
echo "end" > /tmp/usbinfo_lock
}

if [ ! -f "/tmp/usbinfo" ]; then
	touch /tmp/usbinfo
fi


case "$1" in
    start)

		_Usb_HD_Mount $2 $3
              
	;;
	*)
  exit 1
  ;;
esac